Aug
31
2011
--

Team Obsolete 1954 AJS Porcupine


This beautiful and very rare 1954 AJS Porcupine was sent in by Larry from Team Obsolete in Brooklyn, New York. This AJS was meticulously rebuilt by the Team Obsolete crew in 2004 and was due to go up for auction this month. Similar restored examples of these bikes have fetched over $200,000USD so if you happen to be a cashed up collector now's the time to get in touch with them. Larry also provided a history of the AJS porcupine which is a great read for any motorcycle lover...


1954 AJS 497cc E95 Porcupine " Racing Motorcycle" Frame no. F3, Motor No E2 / 54

Britain's first success in the modern era's Grand Prix World Championships was achieved by a marque with an illustrious racing history - AJS. And the machine that carried Les Graham to his, and AJS', first and only World Championship in 1949 was, of course, the legendary Porcupine. To this day the Porcupine remains the only twin-cylinder motorcycle to have won the 500cc World Championship. The 1954 AJS 500 c.c. E-95 Porcupine represents the final development of the most exotic, innovative, and graceful British Grand Prix racing motorcycle ever made. New for 1954, its final year of competition, the unique low handmade alloy “pannier” fuel tank wraps around the motor. The magnesium camboxes protrude out from under the front of the tank, capturing the cooling air.

Only four E-95‟s were built. They first appeared at the 1952 Isle of Man TT. Development continued, eventually under the genius of race shop head Jack Williams. For the 1954 Season he introduced the pannier fuel tank (which required a fuel pump) with the matching lowered chassis.

Unlike the rival works Nortons, the Porcupine shares little with the production machines sold to the public. The motor and gearbox are unit construction with gear primary drive. Power is transmitted through what may be the most beautiful exposed clutch ever seen. The long graceful cast alloy underslung oil tank is a full gallon in capacity. The twin overhead camshafts are driven by a train of gears that also drive the special aircraft magneto and the high capacity oil pump. Extensive use is made of lightweight ELECKTRON castings.


Conceived towards the end of WW2, the Porcupine was originally designed to be run either with or without forced induction. Supercharged multi-cylinder engines had begun to threaten the single's supremacy towards the end of the 1930s and indeed, AJS themselves went down this road with their fearsome water-cooled V4. Fast yet difficult to handle, the latter had demonstrated that horsepower bought at the expense of excess bulk and weight was not the answer, so the thoughts of designer Vic Webb turned to a twin. Laying the cylinders almost horizontally with their heads facing forwards ensured adequate cooling and a low centre of gravity while at the same time providing room, if required, for a blower above the gearbox. When the FIM banned supercharging at the end of 1946, AJS was ready with new cylinder heads designed for normal aspiration!

Typed E90 but dubbed 'Porcupine' by the motorcycling press because of its distinctive spiked 'head finning, AJS' new challenger debuted at the 1947 Isle of Man TT in the hands of Les Graham and Jock West, the pair finishing 9 th and 14 th respectively after encountering a variety of minor problems. By way of consolation, West's best lap was only three seconds down on the fastest and showed that the bike had promise. The Porcupine's first race victory was achieved later that year by Ted Frend at the Hutchinson 100. Development continued throughout 1948, with a number of Grand Prix podium finishes and 18 world speed records among the season's highlights
.
The inaugural 500cc World Championship of 1949 consisted of six races, with victory going to Les Graham at the Swiss and Ulster Grands Prix. Bill Doran won the Belgian GP to assure AJS of the manufacturers' title, while Graham's two wins were enough to take the riders‟ championship from Gilera's Nello Pagani.

Many years later, AJS works rider Ted Frend - the first rider to win on the bike - recalled that carburetion had been the Porcupine's biggest problem. Over the years several different induction arrangements were tried. Eventually, the 1954 pannier fuel tank and fuel pump solved this problem. The E90 was also bedevilled by failure of the gear driven magneto shafts - the cause of Graham's retirement from the lead of the '49 Senior TT just when two minutes from the finish. The problem was solved when chain drive for the magneto was adopted on the revised E95 engine. Introduced in 1952, the E95 engine had its cylinders tilted upwards at 45 degrees, an arrangement that permitted a shorter wheelbase. The new motor layout featured a more robust crankshaft, and improved cylinder head architecture. Its distinctive spike fins had gone, but the „Porcupine name stuck. The E95 enjoyed a dream debut, new recruit Jack Brett and Bill Doran finishing 1 st and 2 nd respectively at the season-opening Swiss Grand Prix, with New Zealand star Rod Coleman in 5 th place.


Another new addition to the AJS team for '52, Coleman had first been given an E90 to try at the '51 Ulster GP and followed that up with a strong showing at the Grand Prix Des Nations at Monza. "In the race it was quite definitely faster than the Nortons and I had little problem getting past Geoff (Duke) and Ken (Kavanagh) with just three Gileras only a short distance ahead," Rod recalls in his book, The Colemans. I did get with them and found again that the Porcupine was just as fast as the Gileras but was down a little on acceleration from the slower corners, but not by much. I was just beginning to think I had every chance of second place behind Milani when the motor stopped." The cause? Yet another magneto shaft failure.

For 1954, the final year of competition, the E95 Porcupine (and works 'triple-knocker' 7R3 350 single) gained the new pannier-style fuel tanks which extended down on either side of the engine, thus lowering the centre of gravity and affording a measure of streamlining at the same time. An AC fuel pump was used to raise fuel to the carburetors, a delivery system that involved mechanics standing the bike on its rear wheel to prime the internal header tank for starting! Jack Williams took over the race team that year and the result of his development was a much smoother engine, which now produced a maximum of 54bhp at 7,800rpm. Bob McIntyre, Derek Farrant and Rod Coleman were the riders, the latter providing the Porcupine with its best international results of the season, placing 2 nd in Ulster and winning the Swedish Grand Prix. Other riders to swing a leg over the Porcupine during its short career include Bill Lomas, Robin Sherry and Reg Armstrong.


Sadly, 1954 would prove to be the Porcupine's swansong year. With the death of AMC founder Charlie Collier, AJS withdrew from direct involvement in Grand Prix racing at the season's end, never to return. But the record books tell the story: between 1949 and 1954, Porcupines finished 24 races with five wins, seven 2 nd places and one World Championship. In total, only four complete E90 and four E95 machines were built. Only one E-90 survives.With the exception of the E95 acquired later by privateer Tom Arter, they were raced exclusively by the works team and never offered for public sale. Fortunately, all four E95s survive today. Two are in a Chartered Museum. One other is in private hands, owned by Team Obsolete. The E95 Porcupine offered here was acquired by the late Roy Richards, founder of the UK's National Motorcycle Museum in the 1980s. On display at the Museum for decades, F3 was mechanically restored in the USA between 2000 and 2004 by New York-based Team Obsolete - luckily escaping the Museum‟s disastrous fire of 2003.

Quoted in Motorcycle Sport & Leisure magazine (August 2011 edition) Team Obsolete's Rob Ianucci enthused about the Porcupine: It's the Holy Grail of British motorcycles. It was conceived in the darkest days of the Second World War, and was created on limited budgets during the austerity of post-war Britain by dedicated men who were passionate about their craft. Yet they created a motorcycle which won the 500cc World Championship, and in my opinion was a truly beautiful mechanical object... It's a two-wheeled work of art.

After the rebuild's completion by Team Obsolete, the Porcupine went back to the NMM, arriving in time for its reopening in December 2004.



If you're in the area I would strongly suggest dropping in and checking out the Team Obsolete motorcycle collection. Larry tells me they have quite an extensive collection of classic motorcycles including Cal Rayborn Harleys, Redman's Honda 6, and the G-50 Matchless that Dave Roper won the Isle of Mann on, as well as many other Matchless G-50's, Benelli 350/4's, and MV Agusta prototypes from the 60's.

Thanks Larry.


Written by TonUp in: Cool Motorcycle Stuff | Tags:
Aug
30
2011
--

Priest movie motorcycles


The movie Priest which came out in cinemas earlier this year is the story of an alternate futuristic world where man kind has been battling with Vampires for centuries. The film follows a priest who has disobeyed his church to hunt down the blood thirsty Vampires that have kidnapped his niece on his turbine powered motorcycle (!).


While the film may not be of interest to you (or me) the motorcycles they designed and built for the film might. The two companies responsible for building the bikes, Cinema Vehicle Services and Ghostlight Industries started with the Suzuki Gladius as a base. Here's a nice one in pink...


The builders took the initial artists sketches and made adjustments that would allow them to create fully functioning, useable vehicles for on the set of the film. The most striking thing about the concept bikes (apart from the huge turbines at the front) are their extended length and the low ride height which both pose significant challenges. 



Alloy swingarms were fitted to the rear of the bikes with a strengthened suspension setup similar to that used on sidecars. The front wheels were also extended out from the bikes using completely custom designed front ends. The low stance was then achieved by building custom fuel tanks that could be relocated to beneath the seat in the extra space created by the massively extended swing arm. 



Once the builders were satisfied that the chassis of the motorcycles were visually correct and safe to ride work began on the bodywork. Using foam and wood the extreme styling from the concept sketches was shaped over the heavily modified Gladius. Casts were then taken and fibreglass panels were produced for each of the six motorcycles built for the film. The final touches including paint, age effects and the weapons were then added by the productions art department before filming began.



All the motorcycles produced for the film too around 6 weeks to produce. The priority of all the work done on the Suzuki's was their functionality and one builder was quoted as confidently saying that the motorcycles could be road registered and ridden daily. Some of the motorcycles still remain after filming had ended and are fully functional, Vampire killing machines. Maybe one day you'll have a chance to pick one up on eBay?




If you think these are cool check out the build of the Tron Light Cycles here.



Written by TonUp in: Cool Motorcycle Stuff,Suzuki | Tags:
Aug
30
2011
--

1952 Triumph Thunderbird

Depending on what floats your boat, you will eventually make the pilgrimage to your 'Mecca'. If you are a surfer, then you will take on the waves at Teahupoo. If you're an Elvis fan, then you will shuffle your blue suede shoes to Gracelands. And if you are a motorhead, then you will take your speed machine to the Bonneville salt flats, like many did a few weeks ago. One of those people was Alp Sungurtekin, who took his purpose built bike, a 1952 Pre-Unit 650cc Triumph Thunderbird. The bike is named 'Kursed' - because of all the things that went wrong with it. He really had to race the clock to have it finished on time. Actually, he was still working on it up until the final hours of leaving for the legendary salty race strip. This is how Alp describes his time at Speedweek and the pursuit of his own personal land speed record. 

Written by Scott in: Cool Motorcycle Stuff,Racer | Tags:
Aug
29
2011
--

Thekatros Suzuki Thunder 125 Cafe Racer


Customising a 125cc motorcycle isn't what a lot of Cafe Racer lovers would consider. With so many bigger bore motorcycles available and plenty of wide open roads, big bore bikes are the obvious choice for a Cafe Racer conversion. However in the heavily populated cities of Asia big bore bikes are a rarity. Their weight and power make them unusable in the "heavy traffic". Streets are filled with small bore, light weight motorcycles, buzzing and maneuvering like a swarm of angry bees. These bikes are in most cases the popular transport option for the masses so it's only natural that these bikes become the base for custom workshop projects.




One example of a workshop doing this is Thekatros custom motorcycles. Thekatros took a somewhat sleepy looking Suzuki Thunder 125 and transformed it in to this very respectable Cafe Racer aptly named "Wake Up". The little Suzuki had laid sleeping for around a year before it was wheeled in to Thekatros workshop and it's extensive 7 month transformation began.





Every piece of the Thunder's original bodywork was removed and thankfully never reattached. A new tank and custom tail section were hand made by Thekatros and 5mm of foam was fitted to the seat pan to cushion the bumps coming through the now stiffened back end. A custom exhaust and silencer were also fabricated and fitted to make the most of the engines power and sound. To finish the look of the bike off a gold highlighted colour scheme was applied and complimented with brass grips from POSH, an airbrushed air cleaner cover and winged side panel motif (all painted in house at Thekatros).

This little Suzuki Thunder may only be 125cc but it packs plenty of visual punch.





Spec Sheet 
Front Tire : Cheng Shin 90/90-18
Rear tire : IRC 4.00-18
Gas tank : Yamaha RS custom Hornet
Seat : Hand made Thekatros
Side cover : Hand made Thekatros
Silencer : Hand made Thekatros
Carb filter : VW
Rear Shock : Steel pipe 3/4 mm
Front Shock : Stock-extended 150 mm
Head light : H3 with custom paint
Rear light : Oval
Hand grip : Posh
Engine CDI : BRT
Coil : Shindegen
Painting by Thekatros



Aug
28
2011
--

1974 Honda CB125 – Uprising 149

Purple. It's not a colour you choose to coat your beloved custom with lightly. If you're anything like us, you'll just default to rattlecan black, or maybe live on the wild side and go for a metallic white. Crazy! Hell, purple's not a colour you'd often choose to coat anything with. When's the last time you walked down the street in a purple shirt, or considered a nice shade of lilac to give your house a little zip. That's right, just about never. Ever. Unless you're four foot nothing and you have the words "formerly known as" in your name. How then, you may ask, do those mechanical magicians at Jakarta's increasingly bitchin' Uprising customs manage to make such a damn funky colour look so stupidly cool? Well, I asked them. And they told me something you're not going to believe.

Aug
28
2011
--

Shinya Kimura MV Augusta 750 S America



Another work of art from the master of metal, Shinya Kimura. Looking at the picture blow I'm gonna have to say it's an improvement. I love the hand formed look of the steel on Shinya's bikes and the beautifully organic lines he creates. The way that exhaust sweeps up is so subtle but it adds so much more to the bike than straight pipes would. Check out the vid below to hear it running.



 


Aug
28
2011
--
Aug
24
2011
--

2006 KTM 950 SM – Miss Hyde

Hilarious - now step aside so we can see the damn bike

Ever got your hands on a bike that is so captivating, so enthralling, so stupidly fast that she somehow takes control of your senses and transforms you from a law-abiding citizen into a law breaking, twist it to the stop, foaming at the mouth and giggling into your helmet lunatic? Fun, huh? And you're not the only one who thinks so. See, this is the story about another mild-mannered man like yourself, named Osiyuyu, who is a Fine Arts University Scholar and a "recognised antique art restorer." He too has a penchant for creating scary motorcycles – and a little bit of woman chasing on the side. Meet the latest creation to crystalise out of his deranged brain... a KTM 950 called "Miss Hyde."

Written by Scott in: Cool Motorcycle Stuff | Tags: ,

Powered by WordPress | Theme: Aeros 2.0 by TheBuckmaker.com | Technorati Profile